 |
| SYMNET PRODUCTS |
 |
|
|
 |
|
|
| 8x8 DSP with 8 ins, 8 outs, 64-channel SymLink Expansion |
|
| The SymNet 8x8 DSP is the original model in the SymLink series of network audio processors. Powered by four Analog Devices SHARC® processors, the 8x8 DSP delivers pristine audio through eight (8) mic/line-selectable analog inputs (with independent 48 VDC phantom power per channel) and eight (8) line-level analog outputs. Coupled with a comprehensive external control connectivity scheme, this unit is a very powerful tool for the modern system designer or integrator. SymNet's market presence is made evident by the number of audio professionals around the globe who bet their reputations on SymNet 8x8 DSP hardware every day. |
|
|
|
 |
|
 |
|
ARC-2 Adaptive Remote Control Wall Panel |
|
|
|
The ARC-2 is a menu-driven remote control for Symetrix DSPs. Tap into the full power of your system with twenty-four (24) menus with up to sixteen (16) enumerations each that can be used to address multiple basic functions or initiate complex logic-based control events: gain, preset triggering, source selection, room combining and more.
|
|
|
|
|
|
 |
|
ARC-2i Integrator Series Adaptive Remote Control Wall Panel |
|
|
|
The ARC-2i is a menu-driven remote control for Symetrix DSPs. Tap into the full power of your system with twenty-four (24) menus with up to sixteen (16) enumerations each that can be used to address multiple basic functions or initiate complex logic-based control events: gain, preset triggering, source selection, room combining and more.
|
|
|
|
|
|
|
|
|
|
 |
|
ARC-K1 Modular Remote Control Wall Panel |
|
|
|
The ARC-K1 is a modular remote contorl for Symetrix DSPs featuring a push-button rotary encoder that provides the client with simple control of two (2) parameters in the system.
|
|
|
|
|
|
 |
|
ARC-MIC Modular Remote Control Wall Panel |
|
|
|
The ARC-MIC is a modular remote control for Symetrix DSPs that combines an onboard electret condenser microphone and push-to-talk button with the ARC-SW4's four momentary pushbutton switches that provide the client with simple control over zone selection plus paging and more.
|
|
|
|
|
|
 |
|
|
| ARC-PS Rack Mount Wall Panel Power Supply |
|
| The ARC-PS is a single rack space power supply, data and ARC Audio breakout for the ARC Wall Panel remotes. Designed to simplify cabling in any system with multiple ARC Wall Panels, the ARC-PS distributes power, RS-485 data and one (1) channel of analog ARC Audio over CAT5 cable from each of its eight (8) rear panel RJ-45 jacks. |
|
|
|
|
|
 |
|
ARC-SW4 Modular Remote Control Wall Panel |
|
|
|
The ARC-SW4 is a modular remote control for Symetrix DSPs featuring four momentary pushbutton switches that provide the client with simple control over source selection, preset triggering and more.
|
|
|
|
|
|
 |
|
ARC-SWK Modular Remote Control Wall Panel |
|
|
|
The ARC-SWK is a modular remote control for Symetrix DSPs that combines the functional attributes of the ARC-K1 and ARC-SW4 into a single product featuring a push-button rotary encoder and four momentary pushbutton switches that provide the client with simple control over source selection with volume, room combining and more.
|
|
|
|
|
|
 |
|
ARC-XLR Modular Remote Control Wall Panel |
|
|
|
The ARC-XLR is a modular remote control for Symetrix DSPs that combines an XLR audio connection and push-to-talk button with the ARC-SW4's four momentary pushbutton switches that provide the client with simple control over zone selection plus paging and more.
|
|
|
|
|
|
|
|
 |
|
|
| BreakIn12 Twelve (12) Channel Analog Input Expander |
|
| The BreakIn12 is an analog audio input channel expander for SymLink hardware. Featuring twelve (12) mic/line-selectable inputs and no onboard DSP, its sole purpose is to increase system analog input channel count while reducing system cost-per-channel. While DSP requirements vary among system designs, two BreakIn12 units can generally be supported by one 8x8 DSP. |
|
|
|
|
|
 |
|
|
| BreakOut12 Twelve (12) Channel Analog Output Expander |
|
| The BreakOut12 is an analog audio output channel expander for SymLink hardware. Featuring twelve (12) balanced line level outputs and no onboard DSP, its sole purpose is to increase system analog output channel count while reducing system cost-per-channel. While DSP requirements vary among system designs, two BreakOut12 units can generally be supported by one 8x8 DSP. |
|
|
|
|
|
 |
|
|
| CobraLink CobraNet® Digital Audio Network Interface |
|
| The CobraLink unit functions as a translator between SymLink™ and CobraNet® buss technologies. It has no onboard DSP. It allows the sharing of digital audio between SymLink rings, Express units, and third-party CobraNet-compatible hardware including amplifiers and powered speaker systems. |
|
|
|
|
|
 |
|
|
| Control I/O Control Input and Output Expansion Interface |
|
| The Control I/O is an RS-485-based peripheral for Symetrix DSP systems. Control I/O also has a stand-alone ASCII mode, which is compatible with third-party hardware such as those from AMX, Crestron, etc. Control I/O functions as a hardware interface for analog controls such as switches, pots, relays and binary outputs – including generic MIDI devices that can be configured to function as a mixing console-type interface for SymNet. |
|
|
|
|
|
 |
|
|
| Express 12x4 Cobra DSP with 12 ins, 4 outs, built-in CobraNet® |
|
| SymNet Express is a family of nineteen (19) inch rack-mountable digital signal processors (DSPs) that are setup and controlled by SymNet Designer software. They are ideal for audio applications such as churches, conference rooms, courtrooms, night clubs and many others. The Express 12x4 Cobra features DSP with 12x4 analog I/O plus sixteen (16) channels of CobraNet I/O. Express is easily integrated with ARC Wall Panel remotes and/or AMX, Crestron and similar control systems. |
|
|
|
|
|
 |
|
|
| Express 4x12 Cobra DSP with 4 ins, 12 outs, built-in CobraNet® |
|
| SymNet Express is a family of nineteen (19) inch rack-mountable digital signal processors (DSPs) that are setup and controlled by SymNet Designer software. They are ideal for audio applications such as churches, conference rooms, courtrooms, night clubs and many others. The Express 4x12 Cobra features DSP with 4x12 analog I/O plus sixteen (16) channels of CobraNet I/O. Express is easily integrated with ARC Wall Panel remotes and/or AMX, Crestron and similar control systems. |
|
|
|
|
|
 |
|
|
| Express 4x4 Cobra DSP with 4 ins, 4 outs, built-in CobraNet® |
|
| SymNet Express is a family of nineteen (19) inch rack-mountable digital signal processors (DSPs) that are setup and controlled by SymNet Designer software. They are ideal for audio applications such as churches, conference rooms, courtrooms, night clubs and many others. The Express 4x4 Cobra features DSP with 4x4 analog I/O plus sixteen (16) channels of CobraNet I/O. Express is easily integrated with ARC Wall Panel remotes and/or AMX, Crestron and similar control systems. |
|
|
|
|
|
 |
|
|
| Express 8x8 Cobra DSP with 8 ins, 8 outs, built-in CobraNet® |
|
| SymNet Express is a family of nineteen (19) inch rack-mountable digital signal processors (DSPs) that are setup and controlled by SymNet Designer software. They are ideal for audio applications such as churches, conference rooms, courtrooms, night clubs and many others. The Express 8x8 Cobra features DSP with 8x8 analog I/O plus sixteen (16) channels of CobraNet I/O. Express is easily integrated with ARC Wall Panel remotes and/or AMX, Crestron and similar control systems. |
|
|
|
|
|
 |
|
MS-1 Sense Microphone Wall Panel |
|
|
|
The MS-1 Sense Microphone Wall Panel from Symetrix is a
panel mounted microphone used with Symetrix products
which feature SPL Computer functions.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
SymVue |
|
|
|
SymVue is a real-time user control panel application that displays control screens exported from SymNet Designer 9.0 functioning as a multi-user, multi-point control environment for SymNet systems.
|
|
|
|
|
|
|
|
|
|
| ^TOP |
|
